Stone Miter Clamps | Miter Clamps for Stone | Install tooling tools for stone slab stitching | 2 pieces
Stone miter clamps or miter clamps for stone are specialized clamps used in stone cutting and fabrication. They are used to hold two pieces of stone together while they are being cut or joined at a mitered angle, such as for making countertops or other stone surfaces.
The clamps typically consist of two parts: a base plate and a clamp mechanism. The base plate is attached to one piece of stone, while the clamp mechanism is attached to the other piece. When the two pieces are brought together at a mitered angle, the clamp mechanism is tightened to hold the pieces firmly in place.
Stone miter clamps come in a variety of sizes and styles, depending on the specific application. They can be used with both natural and engineered stone or granite materials and are often used in conjunction with other stone cutting and fabrication tools, such as diamond blades, grinders, and polishers.
We like to assure you of the quality and quick deliveries of all the products. We are also committed to satisfying our customers and building a long relationship. You can buy your desired products without any hesitation. For more information about our products, policies, and our delivery systems just click. If you have any further queries regarding use or others, you are humbly requested to contact our email or phone number.
STONE MITER CLAMPS SPECIFICATION
Height: Max. 140 mm slab
Application: 45° degree stone joint
ADVANTAGES OF STONE MITER CLAMPS
1. 45° degree Miter Clamp is mainly use for the (man-made and natural), or other similar sheet of 45 stitching.
Since its launch, with high quality and innovative ideas, best-selling tool in domestic and overseas market.
2. When two work pieces are processed into a 45° edge bevel, then clean the 45° face of work-piece, evenly coated with adhesive, then put two work-piece of 45° bevel face assembling together, and the two 45° degree work-piece fit into a 90 with each other, use the fixture in plastic extrusion seam stitching.
3. First, put the button of width stone on the fixture work surface which with white rubber,
the side of the narrow stone close to the 90° inside of the fixture.
4.Then two binder lever can be adjusted by adjusting spring device access to the top position of the workplace, then rotating the screw at the top of the binder lever to put pressure in place to maintain the fixture locked position for a certain time, until the work-piece fully bonded joints, solid, and then release the fixture.